Senin, 22 Februari 2016

KYORITSU Leakage Clamp Meters KEW 2413R

Leakage Clamp Meters

KEW2413R
 
Selection GuideInstruction Manual
 

Large transformer jaws of 68mm diameter makes it possible to clamp on all three or four wires (3 phases) together for leakage current measurement.
True RMS enables an accurate measurement for distorted waveforms.
Measurement from mA up to
AC 1000A
Frequency filter switch to eliminate the effect of the harmonics.
2 way analogue output terminal:
AC current detected by transformer jaws is converted to AC and DC voltage. Output cord model 7073 (option) is used for monitoring waveform with an oscilloscope or for connecting to a recorder.
2413R
CE

TRUE RMSØ68MAX AC1000Resolution 0.1mAOUT PUTPEAK 10/100msFilter
 
AC A
(50/60Hz)
200mA/2/20/200/1000A
|±2.5%rdg±5dgt (200mA/2/20A)
|±3.0%rdg±5dgt (200A, 0 - 500A)
|±5.5%rdg (501 - 1000A)
AC A
(WIDE)
200mA/2/20/200/1000A
|±1.8%rdg±5dgt (50/60Hz) (200mA/2/20A)
|±2.0%rdg±5dgt (50/60Hz) (200A, 0 - 500A)
|±5.0%rdg (50/60Hz) (501 - 1000A)
Conductor SizeØ68mm max.
Frequency Response40Hz - 1kHz
Output
Waveform :AC200mV against the maximum value of each range (1000A range is 100mV)
Recorder :DC200mV against the maximum value of each range (1000A range is 100mV)
Crest Factor3.0 or less
Withstand Voltage3700V AC for 1 minute
Applicable StandardIEC 61010-1 CAT III 300V Pollution degree 2
IEC 61010-2-032
Power Source6F22 (9V) × 1 *Continuous measuring time: Approx. 60 hours
Dimensions250(L) × 130(W) × 50(D)mm
WeightApprox. 570g (including battery)
Accessories9094 (Carrying Case)
6F22 × 1
Instruction Manual
Optional7073 (2WAY Output Cord)

Tidak ada komentar:

Posting Komentar