Selasa, 29 Maret 2016

SK - SATO Infrared Thermometer Model SK-8920 Cat.No.8264-00


SK - SATO Infrared Thermometer Model SK-8920

Cat.No.8264-00
Ideal for food processing industries. Possible to select suitable emissivity of food by referring to the illustrations on the panel. 10:1 Distance to spot ratio. The laser marker can instantly identify the target.
FEATURES
  • Instant surface temperature measurement:
    The advantage of the non-contact infrared method is quick-response measurement. And the single-hand-held unit allows easy operation by using the trigger type measurement button.
  • Non-contact and clean measurement:
    Ideal for food processing industries where clean and hygienic measurement is required
  • Selectable emissivity:
    Emissivity is selectable among 0.98, 0.92 and 0.85.
  • Easily visible measurement spot:
    With the laser marker on, a laser sighting is output to instantly identify the measured spot.
  • Auto power off function:
    The power will be automatically turned off if the unit has not been operated for about five seconds, thus conserving battery power if you forget to turn the power off.
  • Wide range of temperature:
    A wide range of temperature from -40 to 250°C
  • Auto Hold function:
    A measured value is automatically held (fixed) for about six seconds.
  • Top and grip cover:
    The cover protects the unit from dust or dirt.
Emissivity
0.98
meat, fish, vegetable, fruit,
bread, wheat, grain etc.
0.92
paper
0.85
iron, cast iron, glass etc.
SPECIFICATIONS
ModelSK-8920
Measuring range-40 to 250°C

Accuracy
± 3°C at -40°C to -20.0°C
± 2°C or ± 2% rdg at 19.9 to 250°C
(conditions)Ambient temperature at 23°C ± 5°C
calibrated by black body emissivity at 0.95
Resolution1°C at higher than 100°C
0.1°C at other than above
Emissivity (*1)Selectable among 0.98, 0.92 and 0.85
Distance to spot ratio
(*2)
10 : 1
SensorThermopile
Spectral response (*3)8 to 14μm
Response time0.5 second
Laser sighting1 point, Class II Laser (use less than 1mW of power)
Wave length650 nm
Outputless than 1mW
Operating ambient0 to 50°C for temperature
less than 80%rh for humidity (no condensing)
Storage ambient-20 to 50°C for temperature
less than 90%rh for humidity (no condensing)
Power requirement9V battery x 1 (included)
Power consumptionmax. 28mA (when Laser ON)
Battery Lifeapprox. 8 hours (Laser ON)
approx. 70 hours (Laser OFF)
FunctionsSelectable emissivity
Laser marker ON/OFF
Auto power off
Auto hold
Dimensions(W) 46 x (H) 160 x (D) 78 mm
Weightapprox. 157 g (with battery)
MaterialsUnit: ABS resin Covers: PVC resin
Standard accessories9V battery x 2 (one is factory set), Hand straps, Soft pouch, Vinyl Cover (top and grip cover)
(*1) Emissivity:
An object's ability to emit or absorb energy. Perfect emitters have an emissivity of 1. An object with emissivity of 0.8 absorbs 80% and reflects 20% of the incidental energy. Emissivity may vary with temperature and spectral response (wavelength).
(*2) Distance to spot ratio (D:S)
The infrared thermometer focuses infrared energy form an object onto its detector at the rate. 10:1 distance to spot ratio means that the infrared thermometer will read 20mm diameter area 200mm away. For higher accuracy, make sure the area of the object is at least twice as large as the spot being measured
(*3) Spectral Response: 
The specific wavelength region where an infrared thermometer responds (in the 0.7 to 20μm band of the electromagnetic spectrum). Instrument response is dependent on the emissivity, reflectance, and the transmission of infrared energy. A spectral response in the range of 8 to 14μm is good for general use.
Positional Relation between Distance and Sighting Point
This is a one-point laser-sighting thermometer. The laser mark is sighted approximately 14 mm below the center of the spot.
(When the distance is approximately 280 mm)
When the measurement distance is approximately 280 mm, the laser marker is output aiming at the point illustrated above. Refer to the figure as a guide.

Tidak ada komentar:

Posting Komentar