Kyoritsu Clamp Meters Products List

DC Milliamp Clamp Meter

	2500
	Selection Guide Product Catalogue Instruction Manual
	• 0.01mA resolution for DC current • Top class measurement 0.2% accuracy • Φ6mm clamp jaw easy to use in tight places • Measurement from 0.01mA to 120.0mA • Dual display with backlight shows both mA measurement and percent of 4-20 mA span • Spotlight for illuminating measurement point • Analog output terminal for recorder connection • Complies with IEC 61010-1 CAT II 300V

	AC Digital Clamp Meters

	2117R
	Selection Guide Product Catalogue Instruction Manual
	• Fully Safety jaw • Ergonomic over-molded body gives convenient one-hand operation • Large easy-to-read display with 0.01A resolution • Accurate reading with True RMS 60/600/1000A auto-ranging • Long battery life • Safety Standard IEC 61010-1 CAT IV 300V / CAT III 600V

	2200R
	Selection Guide Product Catalogue Instruction Manual
	• Ultra slim and lightweight Handy design • Φ33mm Tear Drop Jaw easy to use in tight places • 1000A AC Clamp Meter • DMM function ACV, DCV, &Ohm, Continuity Buzzer • Fuseless electronic protection on Ω/ up to 600V • Safety Standard IEC 61010-1, 61010-2-032 CAT IV 300V / CAT III 600V

	2210R
	Selection Guide Product Catalogue Instruction Manual
	• Flexible and light weight clamp sensor • Wide reading range up to 3000A • True RMS • MIN MAX function • Backlight LCD display • IEC 61010-1 (CAT III 1000V / CAT IV 600V)

	2002PA
	Selection Guide Product Catalogue Instruction Manual
	• Can measure large AC current up to 2000A. • Peak hold function. • 55mm-dia large tear drop shaped jaws.

	2002R
	Selection Guide Instruction Manual
	• Can measure large AC current up to 2000A. • Peak hold function. • 55mm-dia large tear drop shaped jaws.

	2007A
	Selection Guide Product Catalogue Instruction Manual
	• Sleep function to save battery • Data hold function. • Digital display with maximum 4000 counts.

	2017
	Selection Guide Instruction Manual
	• Tear drop shaped jaws for ease of use in tight places and crowded cable areas. • Designed to meet internationally proven safety standards such as IEC 61010-1, UL3111 and VDE0411. • Three functions in one unit; AC current, AC voltage and resistance. • Resistance range provides audible continuity test. • Frequency response from 40Hz to 1kHz on AC current and voltage ranges.

	2027
	Selection Guide Instruction Manual
	• True RMS reading instrument that permits precise measurements of nonsinusoidal waveform AC current and voltage. Accurate measurements are also possible at low frequencies from 10Hz upwards. • Designed to meet internationally proven safety standards such as IEC 61010-1, UL3111 and VDE0411. • Three functions in one unit; AC current, AC voltage and resistance.

	2031
	Selection Guide Product Catalogue Instruction Manual
	• Can measure large AC current up to 200A. • 24mm-dia tear drop shaped jaws.

	2040
	Selection Guide Product Catalogue Instruction Manual
	• Designed to meet international safety standard IEC 61010-1 CAT IV 600V. • CAT IV Clamp Meters can measure the Voltage and Current in both every low and high power circuits. • Thus, very useful for power distribution companies, power utilities and maintenance fields.

	2200
	Selection Guide Product Catalogue Instruction Manual
	The Slim and Lightweight 1000A AC Clamp Meter

	AC Analogue Clamp Meters

	2608A
	Selection Guide Product Catalogue Instruction Manual
	• DC voltage range is also available especially for checking emergency battery operated power supply. • Can measure temperature using optional probe. • Tear drop shaped transformer jaws for ease of use.

	2805
	Selection Guide
	• Range switch selects only one rotary scale at a time, making it easy to take readings correctly. • A long time seller with proven reputation world wide for its easy-to-use functions.

	AC/DC Digital Clamp Meters

	2003A
	Selection Guide Product Catalogue Instruction Manual
	• Equipped to measure both AC and DC current with transformer jaws of large diameter. • Can measure AC and DC currents up to 2000A. • Output terminal for connection to recorders.

	2009R
	Selection Guide Product Catalogue Instruction Manual
	• CAT IV Clamp Meter can measure the Voltage and Current in both very low and high power circuits. • Accurate True-RMS reading of AC current or voltage with distorted waveform. • Can measure AC and DC currents up to 2000A. • Output terminal for connection to recorders.

	2010
	Selection Guide Instruction Manual
	• High sensitivity, miniature AC/DC clamp meter. • 0.1mA minimum resolution for AC current and 1mA minimum resolution for DC current. • Output terminal for recorder connection.

	2033
	Selection Guide Product Catalogue Instruction Manual
	• Smallest clamp meter capable of AC and DC current measurements. • 300A auto ranging has minimum resolution of 0.01A AC/DC. • Auto-zero function to allow one touch zero adjustment.

	2046R
	Selection Guide Product Catalogue Instruction Manual
	• Designed to meet international safety standard IEC 61010-1 CAT IV 600V. • CAT IV Clamp Meters can measure the Voltage and Current in both every low and high power circuits. • Thus, very useful for power distribution companies, power utilities and maintenance fields. • True RMS enables an accurate measurement.

	2055
	Selection Guide Product Catalogue Instruction Manual
	• Designed to meet international safety standard IEC 61010-1 CAT IV 600V. • CAT IV Clamp Meters can measure the Voltage and Current in both every low and high power circuits. • Thus, very useful for power distribution companies, power utilities and maintenance fields.

	2056R
	Selection Guide Product Catalogue Instruction Manual
	• Designed to meet international safety standard IEC 61010-1 CAT IV 600V. • CAT IV Clamp Meters can measure the Voltage and Current in both every low and high power circuits. • Thus, very useful for power distribution companies, power utilities and maintenance fields. • True RMS enables an accurate measurement.

	Fork Current Tester

	2300R
	Selection Guide Product Catalogue Instruction Manual
	• True RMS reading is an essential feature for accurate measurement. • “Non Contact” voltage function indicates the presence of AC voltage by warning the user with an audible signal. • Set the DC current range to zero in one touch with the Zero Adjust function.

	Leakage Clamp Meters

	2412
	Selection Guide Instruction Manual
	• Digital clamp meter with tear drop shaped, medium size transformer jaws specially designed for leakage current measurement. • Frequency filter switch to eliminate the effect of harmonics. • Output terminal for connection to recorders and facility to operate from external power supply permit continuous leakage current monitoring.

	2413F
	Selection Guide Instruction Manual
	• Extra wide transformer jaws are best suited for clamping on all three or four wires (3phases) together for leakage current measurement. • Frequency filter switch to eliminate the effect of harmonics. • Output terminal.

	2413R
	Leakage Clamp Meter Selection Guide Instruction Manual
	• Large transformer jaws of 68mm diameter makes it possible to clamp on all three or four wires (3 phases) together for leakage current measurement. • True RMS enables an accurate measurement for distorted waveforms. • Measurement from mA up to AC 1000A • Frequency filter switch to eliminate the effect of the harmonics. • 2 way analogue output terminal

	2431
	Selection Guide Product Catalogue Instruction Manual
	• Frequency Selector Switch to eliminate the effect of harmonics. • Three AC current ranges 20mA/200mA/200A. • Rotary switch for easy one finger power-on and range selection.

	2432
	Selection Guide Product Catalogue Instruction Manual
	• High Sensitive Model • Frequency Selector Switch to eliminate the effect of harmonics. • Three AC current ranges:4mA/40mA/100A

	2433
	Selection Guide Product Catalogue Instruction Manual
	• Frequency Selector Switch to eliminate the effect of harmonics. • Three AC current ranges:40mA/400mA/400A.

	2433R
	Selection Guide Instruction Manual
	• Frequency Selector Switch to eliminate the effect of harmonics. • Three AC current ranges:40mA/400mA/400A.

	2434
	Selection Guide Product Catalogue Instruction Manual
	• Least affected by external stray magnetic field. • 20mA AC max. in proximity to a 15mm-dia conductor carrying 100A AC • Frequency Selector Switch to eliminate the effect of harmonics.