KYORITSU Flexible Clamp Sensor KEW 8130

Flexible Clamp Sensor

	8130
	Applicable model list
	• Can measure AC current up to 1000A • Flexible and light weight by the air core coil used at the sensor part • Designed to meet the international safety standard IEC 61010-1 CAT IV 300V, CAT III 600V Applicable model 5010/5020 (*), 6300, 6305, 6310, 6315 * When you use the sensors with KEW 5010/5020, please check the "Applicable model list" to check if your KEW 5010/5020 can be used with the sensors.
Conductor size max. Φ110mm Rated current AC 1000A Output voltage AC 500mV / 1000A (AC 0.5mV/A) Accuracy ±0.8%rdg±0.2mV (45Hz - 65Hz) ±1.5%rdg±0.4mV (40Hz - 1kHz) Phase shift within ±2.0° (45Hz - 65Hz) Cable length Approx. 3m Output connector MINI DIN 6PIN Operating temperature & humidity ranges -10 - 50°C, relative humidity 85% or less (no condensation) Output impedance 100Ω or less Applicable standards IEC 61010-1, IEC 61010-2-030, IEC 61010-2-032 CAT IV 300V / CAT III 600V Pollution degree 2, IEC 61326 Weight Approx. 180g Accessories Instruction manual, Cable marker, 9095 (Carrying case)